 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GP1A10/GP1A26LC GP1A10/GP1A26LC s Features 1. Uses 3-pin connector teminl 2. Supply voltage range ( VCC : 21 to 26V ) 3. High sensig accuracy ( Slit width : 0.5mm ) 4. Wide gap between light emitter and detector ( 5mm ) 5. Connector towards upside ( GP1A26LC ) OPIC Photointerrupter with Connetor s Applications 1. Copiers, Printers 2. Facsimiles s Outline Dimensions GP1A10 Internal connection diagram Voltage regulator 1 2 3 (3.5) 4.4 (5.6) 24.0 0.2 ( Unit : mm ) GP1A26LC Internal connection diagram (5.6) 1 GND 2 VO 3 V CC Voltage regulator (3.5) 24.0 0.2 1 1 2 3 2 3 1 GND 2 VO 3 V CC 4.4 10.0 1.4 0.2 0.5 0.1 1.4 0.2 Slit width 0.5 0.1 Slit width 38.0 15.0 5.0 + 0.5 - 0.3 7.0 0.2 46.0MAX. 7.0 0.2 g 32 g 6.0 1 16.0 0.2 15.0 5.0 6.0 16.0 0.2 5.0 5.0 (8.2) (15.5) 3.0 f 3.0 0.1 4.0 R2.0 (7.5) (2.5) (2.5) (15.5) 38.0 3.0 f 3.0 0.1 4.0 R2.0 (2.5) (2.5) 6.5 6.5 4.5 4.5 3.0 0.1 *Unspecified tolerances shall be as follows; Dimensions(d) Tolerance d < 6.0 0.2 6.0 <= d 0.3 * ( ): Reference dimensions g JAPAN AMP made EI 3-pin connector 171826-3 Recommended connectors on the inserted side JAPAN AMP made Housing : 171822-3 Terminal : 170262 -1 etc. gg 3.0 0.1 (7.5) *Unspecified tolerances shall be as follows; Dimensions(d) Tolerance 0.2 d<6.0 0.3 6.0 <= d * ( ) : Reference dimensions g JAPAN AMP made EI 3-pin connector 171825-3 Recommended connectors on the inserted side JAPAN AMP made Housing : 171822-3 Terminal : 170262 - 1 etc. gg * " OPIC " ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip. gg Recommended connectors on the inserted side( See674page ) . " In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device." 10.0 - + 0.5 0.3 GP1A10/GP1A26LC s Absolute Maximum Ratings Parameter Supply voltage *1 Output voltage *2 Low level output current *3 Operating temperature *3 ( Ta = 25C ) Symbol V CC VO IOL Rating - 0.5 to + 30 - 0.5 to + 40 50 0 to + 80 - 20 to + 80 - 20 to + 95 10 to 95 Unit V V mA C C % GP1A10 GP1A26LC T opr T stg RH Storage temperature Operating humidity *1 Collector-emitter voltage of output transistor *2 Collector current of output tranistor *3 The connector should be plugged in/out at normal temperature. s Electro-optical Characteristics Parameter Operating supply voltage Low level supply current Low level output voltage High level supply current High level output voltage Response characteristics Minimum interruption time Minimum sensing time ( Unless otherwise specified VCC = 24V, Ta = 25C ) conditions Light beam uninterrupted Light beam uninterrupted, I OL= 16mA Light beam interrupted Light beam interrupted, R L = 10k , V CC= 26V Ta= 0 to 80C R L= 4.7k VCC= 24V 5% MIN. 21 25.8 166 166 TYP. MAX. 26 30 0.6 30 Unit V mA V mA V s s Symbol V CC ICCL V OL ICCH V OH tH tL Fig. 1 Low Level Output Current vs. Ambient Temperature 60 50 Low level output current I OL ( mA ) 40 Fig. 2 Low Level Output Voltage vs. Low Level Output Current 1 Low levle output voltage V OL ( V) 0.5 VCC = 24V T a = 25C 0.2 0.1 0.05 30 20 10 0 0 25 50 75 80 100 Ambient temperature Ta ( C ) 0.02 0.01 1 2 5 10 20 50 100 Low level output current I OL ( mA ) GP1A10/GP1A26LC Fig. 3 Low Level Output Voltage vs. Ambient Temperature 0.6 V CC = 24V Dashline = GP1A26LC 0.5 Low level output voltage VOL ( V) Fig. 4 Supply Current vs. Supply Voltage 30 0.4 I OL= 30mA Supply current I CC ( mA ) 20 0.3 0.2 16mA 10 I CCL { I CCH T a = 0C + 25C + 80C T a = 0C,+ 25C,+ 80C 0.1 5mA 0 20 0 - 25 0 25 50 75 100 Ambient temperature T a ( C ) 21 22 23 24 25 26 27 Supply voltage V CC ( V) Fig. 5 Detecting Position Characteristics ( 1 ) Fig. 6 Detecting Position Characteristics ( 2 ) Output High Output High V CC = 24V T a = 25C R L = 10k d Shield V CC = 24V T a = 25C R L = 10k Shield h Output Low 0 1 2 3 4 5 Shield distance d ( mm ) 6 7 0 1 2 3 4 5 Shield distance h ( mm ) 6 7 Output Low Detecting position d = 3.0 0.5mm Detecting position h = 3.0 1.0mm GP1A10/GP1A26LC s Recommended Connectors on the Inserted Side q JAPAN AMP made El series connectors ( standard type ) Housing color Housing Model No. Natural Black Blue Green Red color 171822-3 2-171822-3 4-171822-3 6-171822-3 8-171822-3 AWG Product Material Model No. size shape Brass 170204-1 Bulk Copper 170204-2 phosphide AWG 26 to 20 Brass 170262-1 Chain Copper 170262-2 phosphide Brass 170205-1 Bulk Copper 170205-2 phosphide AWG 30 to 26 Brass 170263-1 Chain Copper 170263-2 phosphide q JAPAN AMP made El series connectors ( low profile type ) Housing color Housing Model No. Special terminal Model. No. ( Material: Copper phosphide ) Natural Black Blue color 172142-3 2-172142-3 4-172142-3 AWG Product shape size Bulk AWG 26 to 22 Chain Bulk AWG 30 to 26 Chain Green 6-172142-3 Red 8-172142-3 Model No. 170369-1 170354-1 170370-1 170355-1 Special terminal Model. No. q JAPAN AMP made El series connectors ( amp mass termination ) Housing-terminal united type connector AWG26 AWG24 AWG22 AWG28 ( Natural ( Black ) ( Red ) ( Green ) color ) 172054-3 172053-3 172052-3 172051-3 g Terminal Material: Copper phosphide s Precautions for Use ( 1 ) It is recommended that a by-pass capacitor of more than 0.01 F be added between VCC and GND near the device in order to stabilize power supply line. ( 2 ) In this product, the PWB is fixed with a rear cover, and cleaning solvent may remain inside the case ; therefore, dip cleaning or ultrasonic cleaning is prohibited. ( 3 ) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent. However, do not perform the above cleaning using a soft cloth with cleaning solvent in the marking portion. In this case, use only the following type of cleaning solvent used for wiping off: Ethyl alcohol, Methyl alcohol, Isopropyl alcohol, Freon TE, Freon TF, Diflon solvent S3-E When the cleaning solvents except for specified materials are used, please consult us. ( 4 ) As for other general cautlons, refer to the chapter " Precautions for Use " . |
Price & Availability of GP1A26LC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |